Как прошить роутер tp-link tl-wr841n (tl-wr841nd)?
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
ДЛЯ ОБНОВЛЕНИЯ
ВАЖНО: Чтобы избежать проблем при обновлении ПО, пожалуйста, прочитайте следующую информацию по процедуре обновления. Проверьте соответствие аппаратной версии и версии ПО
Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
Проверьте соответствие аппаратной версии и версии ПО. Установка неправильной версии ПО может повредить ваше устройство и аннулировать гарантию. (Обычно V1.x =V1)
НЕ рекомендуется устанавливать версию ПО, не предназначенную для вашего региона. Нажмите здесь для выбора региона и загрузите наиболее актуальную версию ПО.
- НЕ отключайте питание во время процесса обновления, поскольку это может нанести урон маршрутизатору
- НЕ обновляйте ПО маршрутизатора по Wi-Fi, за исключением тех случаев, когда это является единственно возможным способом.
- Рекомендуется, чтобы все пользователи прекратили использовать все интернет-приложения на компьютере или отключили сетевой кабель от клиентских устройств перед обновлением.
Примечание: Конфигурационные файлы могут быть некорректно установлены на новые версии встроенного ПО, требующие сброса на заводские настройки.
Рекомендации по обновлению ПО: Wi-Fi роутер, Wi-Fi роутер с модемом ADSL2+, Усилитель Wi-Fi сигнала
|
TL-WR841N(RU)_V13_191015
|
|
Дата публикации: 2019-12-20
|
Язык: Русский
|
Размер файла: 6.11 MB
|
|
Modifications and Bug Fixes:
1. Optimized system stability and reliability.
2. Added LED Control function.
3. Supported HTTPS web management.
4. Optimized PPPOE module which could provide more stable connection.
5. Improved stability of L2TP and PPTP connection.
6. Fixed some security issues.
Notes:
For TL-WR841N RU v13.
|
|
|
TL-WR841N(RU)_V13_180330
|
|
Дата публикации: 2018-05-21
|
Язык: Русский
|
Размер файла: 4.58 MB
|
|
Исправления и улучшения:
1. Исправлена ошибка, при которой при определённых условиях не работала функция MAC Clone.
2. Исправлена ошибка, при которой некоторые беспроводные устройства, подключаемые к основному роутеру в режиме RE, не могли пропинговать основной роутер.
3. Исправлена ошибка, при которой устройства Android 7.0 не могли выходить в интернет при нестабильной работе сети.
4. Исправлена ошибка, при которой при использовании режима повторителя (repeater)в определённых условиях не удавалось войти в веб-интерфейс управления.
Новые функции и улучшения:
1. Поддержка SNMP и мониторинга пропускной способности (Throughput Monitor) в режиме точки доступа (AP mode).
2. Поддержка перезагрузки по расписанию.
Примечание:
Настройки вашего устройства будут сброшены после перехода на данное ПО. Вам потребуется выполнить настройку устройства повторно – просьба не восстанавливать файл резервной копии настроек.
|
|
|
TL-WR841N(RU)_V13_170713
|
|
Дата публикации: 2017-07-13
|
Язык: Русский
|
Размер файла: 4.50 MB
|
|
Modifications and Bug Fixes:
Новые функции/улучшения:
1. Добавлены режимы работы Точка доступа/Усилитель сигнала/WISP.
2. Обновлен список провайдеров в мастере быстрой настройки.
3. Установлена версия IGMP V3 по умолчанию.
4. Исправлена проблема маршрутизации для оператора Зеленая точка.
5. Исправлена проблема долгого переподключения PPTP/L2TP.
6. Исправлена проблема рассыпания IPTV в некоторых условиях.
Notes:
1. Для TL-WR841(RU)_V13.
2. Ваши настройки будут утеряны после обновления.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V9_150401
|
|
Published Date: 2015-04-01
|
Language: English
|
File Size: 3.13 MB
|
|
Notes:
1.For TL-WR841N(US)9.0
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
|
TL-WR841N_V9_150310
|
|
Published Date: 2015-03-10
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
Bug Fixed：
1.Fixed the directory traversal security bug;
2.Dyndns will display «succeed»even with the wrong username and password.
Notes:
For TL-WR841N V9.0 and TL-WR841ND V9.0
|
|
|
TL-WR841N_V9_150104
|
|
Published Date: 2015-01-04
|
Language: English
|
File Size: 3.09 MB
|
|
Modifications and Bug Fixes:
- New Features/Enhancement：(1)Added the support for TP-LINK Tether 2.0 Mobile App;
-
Bug Fixed：(1)Fixed the bug that when using WDS function,the PC may not get IP address sometime in three address WDS mode.
Notes:
For TL-WR841ND V9The configuration will be lost after upgrading.To avoid this issue please backup the configuration before upgrading,then restore the router by this configuration file.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V14_200114
|
|
Published Date: 2020-03-25
|
Language: English
|
File Size: 4.33 MB
|
|
New Features/Enhancement:
1. Optimize load handling;
2. Optimize the acceleration function;
3. Optimize the NTP list;
4. Supported the IPv6 auto;
5. Add LED control;
6. Add WAN link status display.
|
|
|
TL-WR841N(US)_V14_191119
|
|
Published Date: 2019-11-20
|
Language: English
|
File Size: 4.46 MB
|
|
Modifications and Bug Fixes:
1.Improve the stability of device.
2.Fix buffer overflow vulnerability discovered by Trend Micro ZDI to increase security.
Notes:
For TL-WR841(US) V14
|
|
|
TL-WR841N(US)_V14_180319
|
|
Published Date: 2018-04-03
|
Language: English
|
File Size: 4.23 MB
|
|
Notes:
First firmware released for TL-WR841 US v14
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V14_200114
|
|
Published Date: 2020-03-25
|
Language: English
|
File Size: 4.33 MB
|
|
New Features/Enhancement:
1. Optimize load handling;
2. Optimize the acceleration function;
3. Optimize the NTP list;
4. Supported the IPv6 auto;
5. Add LED control;
6. Add WAN link status display.
|
|
|
TL-WR841N(US)_V14_191119
|
|
Published Date: 2019-11-20
|
Language: English
|
File Size: 4.46 MB
|
|
Modifications and Bug Fixes:
1.Improve the stability of device.
2.Fix buffer overflow vulnerability discovered by Trend Micro ZDI to increase security.
Notes:
For TL-WR841(US) V14
|
|
|
TL-WR841N(US)_V14_180319
|
|
Published Date: 2018-04-03
|
Language: English
|
File Size: 4.23 MB
|
|
Notes:
First firmware released for TL-WR841 US v14
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(EU)_V14_200903
|
|
Published Date: 2020-11-27
|
Language: English
|
File Size: 4.27 MB
|
|
Modifications and Bug Fixes:
1. Enhanced safety
2. Added the Led Control function
3. Added the WAN Link Status function
4. Optimized the wireless function
5. Optimized user experience of configuring the router
|
|
|
TL-WR841N(EU)_V14_180319
|
|
Published Date: 2018-04-03
|
Language: English
|
File Size: 4.23 MB
|
|
Modifications and Bug Fixes:
1. Optimize the LED display in repeater mode.
2, Fix the bug that LAN_IP would not redirect when in the same subnet with WAN in PPPoE/L2TP/PPTP mode.
Notes:
For TL-WR841 EU v14
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(UN)_V8_170210
|
|
Published Date: 2017-02-10
|
Language: English
|
File Size: 3.48 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
Optimized the security mechanism.
Notes:
1. For TL-WR841N(UN)_V8.2. It is NOT suggested to upgrade firmware which is not for your region. If this site is not for your region, please click here to choose your own region and download the most suitable firmware version.
|
|
|
TL-WR841N_V8_140724
|
|
Published Date: 2014-07-24
|
Language: English
|
File Size: 3.45 MB
|
|
Modifications and Bug Fixes:
- Improve performance of IGMP module;
- Fixed bug：PPPOE can’t dial up successfully in some special situations.
Notes:
For TL-WR841N V8
|
|
|
TL-WR841N_V8_131107_CA
|
|
Published Date: 2013-11-07
|
Language: English
|
File Size: 3.31 MB
|
|
Notes:
for TL-WR841ND(CA) V8
|
|
Nondiscrimination Statement
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N_V11_151021_US
|
|
Published Date: 2015-10-21
|
Language: English
|
File Size: 3.62 MB
|
|
Notes:
1.For TL-WR841N(US)11.0
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
|
TL-WR841N(US)_V11_150616
|
|
Published Date: 2015-10-20
|
Language: English
|
File Size: 3.61 MB
|
|
Notes:
1.For TL-WR841N(US)11.0
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
TL-WR841N(US)_V13_180119
|
|
Published Date: 2018-02-24
|
Language: English
|
File Size: 4.73 MB
|
|
Modification and Bug Fixes:
1. Fixed WPA2 (KRACKs) vulnerability.
2. Fixed the bug that router cannot forward some specific DNS requests.
3. Shorten the interval time to reconnect to PPPoE server after disconnection.
4. Improved the stability of Quick Setup.
|
|
|
TL-WR841N(US)_V13_171020
|
|
Published Date: 2017-10-20
|
Language: English
|
File Size: 4.73 MB
|
|
Modifications and Bug Fixes:
Bug fixes:
Fixed the WPA2 Security (KRACKs) Vulnerability.
Notes:
For TL-WR841N(US)_V13
|
|
|
TL-WR841N(US)_V13_170814
|
|
Published Date: 2017-08-14
|
Language: English
|
File Size: 4.73 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
1. Added IPTV function.
2. Added Access Point/Repeater/WISP mode.
Notes:
1. For TL-WR841N(US)_V13.2.New features have been added into this new firmware, so your device’s current configuration will be lost after upgrading and also the old configuration files will not be accepted by the new firmware.
|
|
